D10 no spindle and no sled movement

ecilesiz · Post time 2019-07-12 09:16:33

Edited by ecilesiz at 2019-07-12 09:16

Hello,

I have a faulty D10. The Laser doesn't return to the middle and the spindle doesn`t turn.

The Display works perfectly but it turns off after 15 seconds because no CD can be detected.
The motors for both sled and spindle work perfectly when voltage is applied.

The fuse has blown.

Do you have any ideas why the fuse would blow?
I have a multimeter to test components and a soldering station to do basic soldering.

kaosun · Post time 2020-12-04 17:42:29

Did you lub the gears? How about if you short the laser limit switch?

		Remember me	Forgot password?
Password			Repair!